Woolcool® rigid thermal packaging.

Sizes* 1, QXS & 0

*Note box orientation

Our packing configuration illustrated shows the recommended load order to achieve optimum results and ensure produce arrives within the specified temperature range.

Step one.

Place the first Woolcool® liner vertically inside the box so the base is completely covered.

Ensure the edge of the liner meets the box side – this will help create a strong seal and increase the effectiveness of the boxset.

Rest the excess liner on the open box lid.

Step two.

Place the second liner horizontally inside the box.

Each liner is cut to the box side and will allow a slight overlap against the first liner.

When placed correctly, the walls and base of the box should now be covered with Woolcool® liner.

If there are any gaps, adjust or reposition the second liner to create complete coverage.

Step three.

Place the recommended number of Woolcool® ice packs (shown in blue) at the base of the Woolcool® box*. Spread evenly on top of the Woolcool® liner.

Depending on the type of items being shipped, you may require a Woolcool® blocker (shown in yellow) to protect your product from thermal shock.

*Please check with your Woolcool® representative to ensure that the optimum ice packs and quantities are being utilised.

Step four.

Place your product (shown in red) inside the Woolcool® box and gently push down to remove any excess air from below the Woolcool® ice packs.

Woolcool’s generous loadspace will allow for multiple products inside one boxset.

Ensure there is sufficient space left above the product for Step five.

Step five.

If recommended for your solution, place a Woolcool® blocker (shown in yellow) on top of the product before adding another layer of Woolcool® ice packs (shown in blue).

Again, check with your Woolcool® representative to ensure you achieve optimum ice pack usage for the required solution.

Step six.

Gather-in the top of the second Woolcool® liner and gently push down on the box contents.

This action helps expel any excess air from within the boxset.

While retaining the gathered liner, fold the first Woolcool® liner over to create a complete thermal barrier.

Tuck the liner’s edge down between the second liner and the box sidewall.

Step seven.

Fold over the box side flaps before closing the first lid to secure the contents in place.

Step eight.

Lastly, fold over the remaining box lid and secure it with the locking tab.

The finished solution will provide a secure, enclosed thermal barrier ready for transportation.

Woolcool® rigid thermal packaging.

Sizes* 3, 4, 5, 7 & 8

*Note box orientation

Our packing configuration illustrated shows the recommended load order to achieve optimum results and ensure produce arrives within the specified temperature range.

Step one.

Place the first Woolcool® liner vertically inside the box so the base is completely covered.

Ensure the edge of the liner meets the box side – this will help create a strong seal and increase the effectiveness of the boxset.

Rest the excess liner on the open box lid.

Step two.

Place the second liner horizontally inside the box.

Each liner is cut to the box side and will allow a slight overlap against the first liner.

When placed correctly, the walls and base of the box should now be covered with Woolcool® liner.

If there are any gaps, adjust or reposition the second liner to create complete coverage.

Step three.

Place the recommended number of Woolcool® ice packs (shown in blue) at the base of the Woolcool® box*. Spread evenly on top of the Woolcool® liner.

Depending on the type of items being shipped, you may require a Woolcool® blocker (shown in yellow) to protect your product from thermal shock.

*Please check with your Woolcool® representative to ensure that the optimum ice packs and quantities are being utilised.

Step four.

Place your product (shown in red) inside the Woolcool® box and gently push down to remove any excess air from below the Woolcool® ice packs.

Woolcool’s generous loadspace will allow for multiple products inside one boxset.

Ensure there is sufficient space left above the product for Step five.

Step five.

If recommended for your solution, place a Woolcool® blocker (shown in yellow) on top of the product before adding another layer of Woolcool® ice packs (shown in blue).

Again, check with your Woolcool® representative to ensure you achieve optimum ice pack usage for the required solution.

Step six.

Gather-in the top of the second Woolcool® liner and gently push down on the box contents.

This action helps expel any excess air from within the boxset.

While retaining the gathered liner, fold the first Woolcool® liner over to create a complete thermal barrier.

Tuck the liner’s edge down between the second liner and the box sidewall.

Step seven.

Fold over the box side flaps before closing the first lid to secure the contents in place.

Step eight.

Lastly, fold over the remaining box lid and secure it with the locking tab.

The finished solution will provide a secure, enclosed thermal barrier ready for transportation.

Woolcool® insulated pouches.

All sizes/materials.

A handy illustration showing how to pack Woolcool® pouches to achieve the best results, ensuring your precious products arrive in perfect condition.

Step one*.

Place the Woolcool® liner on a flat surface.

Position both hands below half way along the Woolcool® liner and use your fingers to pinch the liner; creating a crease on either side.

* If your liner is already in the outer pouch, jump to Step 4.

Step two.

Using your thumbs, push-up to create a channel in the Woolcool® liner.

In one movement, fold the liner upwards in readiness to create a pocket in which the goods will sit.

Step three.

Continue folding the Woolcool® liner to create a wool pocket.

Holding the folded liner with one hand, slide into the plastic or paper pouch sleeve.

Step four.

To maximise space, ensure the folded Woolcool® liner is seated at the base of the plastic or paper pouch.

Place the recommended number of Woolcool® ice packs (shown in blue) inside the Woolcool® pouch*.

Depending on the type of items being shipped, you may require a Woolcool® blocker (shown in yellow) to protect your product from thermal shock.

*Please check with the Woolcool® team to ensure that the optimum ice packs and quantities are being utilised. We are here to help!

Step five.

Place your product (shown in red) inside the Woolcool® pouch and gently push down to remove any excess air from below the Woolcool® ice packs.

Woolcool’s generous loadspace will allow for multiple products inside one pouch.

Ensure there is sufficient space left above the product for Step six.

Step six.

If recommended for your solution, place a Woolcool® blocker (shown in yellow) on top of the product before adding another layer of Woolcool® ice packs (shown in blue).

Again, check with the Woolcool® team to ensure you achieve optimum ice pack usage for your requirements.

Step seven.

Fold-over the top of the Woolcool® liner and gently push down on the pouch contents.

This action helps expel any excess air from within the pouch.

Tuck the flap between the liner and the pouch sidewall.

Step eight.

Lastly, fold over the plastic or paper pouch flap and secure it with the adhesive strip.

When sealed, Woolcool® provides high performing insulation and protection to ship your goods safely.